Rs 2000

New 

Features:
• Infrared sensor switch together with general-use switch.
• On/ Off and PIR operation settings.
• When the switch is turned to “ON” or “OFF”, it can be used as an ordinary switch,
   and when it is turned to “PIR”, it can be used as an infrared sensor switch.
• The light sensitivity and the last of time can adjust itself.
• Commonly used to control lighting and extract ventilation.  
• Power-saving by ensuring lights and fans are not left on.
• They will save energy by ensuring lights and fans are not left on.  
• The energy savings will be high with a short energy saving investment payback time 
   if connected to average energy level lighting such as fluorescent tubes, or compact fluorescent lamps.  
    Higher savings if controlling tungsten or halogen lighting.
• Well suited to circulation areas, integral garages, store rooms, toilets, kitchens,
  common stairs wells or corridors where there are frequently people passing in an
  out of an area and the lighting often gets left on accidentally.
 
Note:
• “A”  should be connected with one line of the lamp and another line of
           the lamp should be connected with zero line.
• “L”  should be connected with the 220V fire line.
• “N”  should be connected with the 220V zero line.

Specification
• Power Source: 220 -240V/AC
• Detection Range: 160°
• Working Temperature:-20~ 40deg C, Working Humidity:<93%RH
• Ambient Light:3-2000LUX(adjustable)                                     
• Time-Delay : min:10sec±3sec  Max:7min±2min
• Installation Height: 1m-1.8m 
• Power Consumption: 0.45W (working)  0.1W (static)   
• Wire connections needed: 3 wire                                  
• Max Rated Load: 600W (incandescent lamp)  200W Max (energy-saving lamp)
• Detection Motion Speed: 0.6-1.5m/s
• Detection Distance: 9m max(<24deg C)
• Dimensions: 76mm x 76mm x 58mm